NDT TRAINING AND CERTIFICATION

 

 
NDT
 
NDT TRAINING AND CERTIFICATION
 
  • Liquid Penetrant Testing
  • Magnetic Particle Testing
  • Ultrasonic Testing
  • Radiographic Testing
  • Radiographic Film Interpretation
  • Visual Testing
  • Ultrasonic Thickness Gauging
  • UT of TKY Joints
 
 
PCN NDT
 
PCN NDT TRAINING AND CERTIFICATION
 
  • MAGNETIC PARTICLE TESTING (MT)
  • ULTRASONIC TESTING (UT)
  • PHASED ARRAY ULTRASONIC TESTING
  • PENETRANT TESTING (PT)
  • TIME OF FLIGHT DIFFRACTION ULTRASONIC TESTING
  • BASIC RADIATION SAFETY
  • RADIOGRAPHIC FILM INTERPRETATION (WELDS)
 
 
CSWIP 3.0/ 3.1/3.2
 
CSWIP TRAINING AND CERTIFICATION
 
  • Level I - 3.0 Visual Welding Inspector

  • Level II - 3.1 Welding Inspector

  • Level III - 3.2 Senior Welding Inspector
 
 
AWS - CWI
 
 
AWS - TRAINING AND CERTIFICATION PROCESS
 
Though the welders can take this test directly without any training, TWG GROUP Research & Training division strongly recommends that the Welder go through a 3-day training program on Weld fundamentals, Interpreting and Understanding WPS, Safety procedures and understanding the process of AWS evaluation and Certification.

On the end of the training, and on the test day the Welder will be guided to choose a WPS and go through the welding process on the supervision of an AWS certified Welding Inspector. On the end of the welding process, the weld specimen shall be subjected to various tests as per WPS and results shall be declared within a week. The Certification and Welder Card will be shipped from AWS USA for the successful welders, in about three weeks from the time of test.
 
AWS - CWI TRAINING AND CERTIFICATION
 
  • QA/QC COURSE

  • WELDERS / GRINDERS

  • AWS - CWI WELDING INSPECTOR
 
BGAS - CSWIP
 
BGAS TRAINING AND CERTIFICATION
 
  • BGAS PAINTING INSPECTOR GRADE 3/2
  • BGAS SITE COATING INSPECTOR
 
BGAS PAINTING INSPECTOR GRADE 3/2
 
Suitable for:
 
Candidates with or without experience in the Painting Inspection Industry. Candidates will be assessed during the course and advised on either grade 3 or 2 exam route dependent on their progress during training.
 
Course Content:
 
Corrosion theory; surface preparation; surface contaminants and tests; paint constituents and technology; solutions and dispersions; drying and curing properties and performance; specified painting conditions; cathodic protection; holiday/pinhole detection; paint-application methods; paint/paint film testing; paint identification; metal coatings; paint faults; colour; inspection methods; specification requirements; health and safety and working practices.
 
API - COURSE
 
API COURSE AND CERTIFICATION
 
  • API 570 - Piping Inspector Program

  • API 510 Pressure Vessel Inspector Program

 
API 570 - Piping Inspector Program
 
The American Petroleum Institute authorized piping inspectors must have a broad knowledge base relating to maintenance, inspection, alteration and repair of in-service metallic piping systems. The API Piping Inspector Certification examination is designed to determine if applicants have such knowledge

The program benefits employers and the industry as a whole by helping to:
 
API 510 Pressure Vessel Inspector Program Minimum Qualification Requirements
 
  • As outlined in the Appendix B of the API 510 Standards, the qualification requirements for API 510 applicants are based on the combination of education and experience related to pressure vessels. This experience must have been acquired within the last 10 years while employed by, or under contract with, an authorized inspection agency as defined in API 510.

  • Based on the 10th edition of API-510, a National Board certification is no longer accepted as a substitution for passing the API-510 exam.

  • Prior to submitting an application, please use the table below to determine if you qualify to take the API 510 exam.
 
ISO - AUDITOR COURSE
 
ISO 9001:2008 Auditor/Lead Auditor Training Course:
 
This course aims to provide you with the opportunity to learn about the subject of auditing of quality management systems, specifically those based on the ISO 9000 family.
 
At the end of the course, participants will learn about: -
 
  • Purpose of a Quality Management System.
  • Principles of Quality Management.
  • Purpose, content and interrelationship of ISO 9000, ISO 9001, ISO 9004 and ISO 19011.
  • Interpretation of ISO 9001 requirements in the context of an audit.
  • Roles and responsibilities of auditors and lead auditors.
  • Planning and conducting an audit in accordance with ISO19011.
  • Reporting of audit, including writing valid, factual and value-adding non-conformity reports.
  • Undertaking audit follow-up activities, including evaluating the effectiveness of corrective action.
  • Role of Accreditation Bodies.
 
CIVIL - NDT
 
NDT FOR CIVIL ENGINEER (CIVIL QA QC )
 
Includes 2 Sections
 
  • NON DESTRUCTIVE TESTING (NDT) SECTION AS PER (IS CODES AND ASTM CODES)
  • QC SECTION
 
NON DESTRUCTIVE TESTING (NDT) SECTION AS PER (IS CODES AND ASTM CODES)
 
  • Rebound hammer test
  • Ultrasonic pulse velocity Concrete testing
  • Penetration methods
  • Pull off and pull out test
  • PROFOMETER
  • NDT for corrosion assessment ,thickness of concrete bridges
  • NDT for detection of cracks voids in concrete bridges
  • Radar method
  • NDT for steel bridges (ULTRASONIC TESTING , MAGNETIC AND LIQUID PENETRANT TESTING )
  • NDT on masonry bridges
 
(Classes will be taken as per INDIAN STANDARDS AND AMERICAN SOCIETY FOR TESTING MATERIALS (ASTM) CODES)
 
QC SECTION:
 
  • Introduction to quality control and civil engineering

  • Planning, assuring and process quality

  • Construction materials and material control

  • Destructive testing

  • Mechanical inspection

  • Safety requirements for testing

  • Results and interpretation

  • Tests on soils

  • Tests on bitumen

  • Tests on cements

  • Tests on aggregates

  • Tests on fresh concrete
 
ONSITE TRAINING :
 
TWG GROUP undertaking consultancy works of QC AND NDT So that you can get an overview and exposure to the field by assisting at site
 

Image Gallery

Contact Info

Phone: +91 9381048884
Address:No.5, boopathy Street, Virugambakkam, chennai - 600 092.Tamil Nadu , India.
Address:Opposite - Virugambakkam bus stop.
E-mail: metallabchennai@yahoo.co.in
contact page

HEAD OFFICE

No.5, Boopathi Street, Virugambakkam, Chennai - 600 092. Tamil Nadu, India.

BRANCH OFFICE

No.4, Old No.128/3, IInd Floor, East Vannier Street, West.K.K.Nagar, Chennai - 600 078. Tamil Nadu, India.

Mail me - Please Click here Jasmine


Placement WebsitePlacement website Click here